Alchemy   AirWerks
  • Home
  • Shop for Parts
  • Picture Gallery
  • Alchemy Blog
  • Kind Words
  • Int'l Orders
  • Contact Us
  • Videos

Post # 10: Limited Run Stubby and Two Revival Pistols

10/21/2014

2 Comments

 
I am pleased to announce that we are already in the process of gathering parts and beginning building some guns that have been done before (what hasn't?) but that we sorely miss.  


The 1740 (basically a 2240 in .177 caliber) has been gone for awhile, but has in most ways been replaced with the 2300T and 2300KT.  All three are / were nice guns.  We think our recipe will best them... and at a comparable price.

The 2289 / BackPacker /  Doomsday Bugout (DBO) has just been discontinued.  Word has it that the Crosman Custom Shop will eventually offer a pumper along these lines. Ours will be better and will be cost competitive given what we will add to it. It will be available in both .22 and .177 calibers with some barrel length choices as well.

Finally, a small run of Stubby / shorty CO2 8 gram cartridge guns will be made as well.  Their tubes, barrels and breeches will be noticeably smaller than a 2240, but they will perform and look fantastic.  After we build the run of complete guns, we will begin offering the parts needed for the DIY builders and modders out there.

The "Stubby" gun will be first out of the gate in a few weeks, then followed fairly quickly by both the 1740 and the 2289.  

So, watch for these and let me know what you think.

  
2 Comments

Post # 9: The Pump RP Valve: Questions Answered

10/3/2014

10 Comments

 
Our Pump RP valve for the 13xx family of Crosman air guns has been very popular due to its performance and the fact that it is Plug & Play (meaning that it simply replaces the stock valve and does not require a flat top adjustable piston).  

Feedback from many dozens of customers has been 100% positive.  Only two were ever returned: one was due to an alignment issue with the threaded hole not exactly 180 degrees from the exhaust port.  Easy fix! The other had a tiny spec of swarf at the check valve.  Another easy fix.

BUT... there is barely a day that goes by that I do not get questioned by prospective owners because they haven't read this blog I am typing now!  LOL 

Lets start at the beginning. I maintain that the longstanding fully modded flat top valve and its companion flat top adjustable piston is not one mod, but actually two.  The flat top of the valve and the mating flat top of the piston has NOTHING to do with the power potential of the valve.  The flat topping business is ALL ABOUT making the physical pumping efficiency so that a user can get more air per stroke into the valve.  Not a bad thing at all, but it does require BOTH parts (more expense and adjustment required) to get it.  I make, sell and use the flat top pair when I want BOTH more efficient pumping and a valve with more power potential.

So what if one were to take a bone stock (un-modded) valve and flat top the face of it... then pair it with a flat top adjustable piston?  What would we have?  It will take less pumps to reach the "sweet spot" (please read earlier blog)... but it will shoot the EXACT SAME fps as the stock valve and piston that took more pumps to reach the sweet spot,  The flat top is for pumping efficiency but does nothing to make the valve ultimately more powerful. So we would have to pump less to get the maximum power from the stock valve, but the performance would not be enhanced at all. 

Let's go the RP direction.  What if we leave the piston stock, then take a bone stock valve and modify it to make the pressure chamber slightly larger in volume... and then make the exhaust chamber slightly larger in volume AND angle the port?  Now the pressure chamber will hold more volume of air.  It will take MORE pumps to bring that larger volume of air even to the same maximum PSI as before the valve was modified, but now when we reach the "sweet spot" ... stop pumping and fire the gun... a larger (and more powerful) volume of air can be released from that larger pressure chamber and exhaust a larger charge to the barrel port for higher fps (and fpe).  Yes, we had to pump more times, but we get more powerful performance results.

We (and our customer users) have proven that this works very well, costs less, and is easier to accomplish. 

Other than having to pump more times to reach the sweet spot, is there any downside to this?  Maybe, depending on the operator.  If someone pumps 20+ times every time they fire... and pumps quickly,,, and shoots many times and often,,, then the stock plastic piston with its rubber cup is going to wear quicker.  I have not seen one break.  I have not even been able to wear out a piston cup yet.  But lets say that this speed demon that shoots an entire tin of pellets every outing... and shoots every time they get a chance... experiences a negative change in the gun's performance after many weeks/months/years (who knows?). What is the downside?  Another new stock piston and cup is cheap and easy to replace.  The valve, tube and linkage should be fine.  

Bottom line for me: I have a couple of guns with this valve and I like what it does for me with the way I shoot.  If I am plinking or target shooting (90% of the time) I do not pump for maximum velocity. If I am shooting for power / speed then I know I have that capability.  When I do pump that many times I do not fiendishly pump because I am not racing to shoot again and I can feel how warm the tube gets when I have done that in the past.    

For some actual chrony data from one of my customers that has two of these (one in a 1322 and the other in a 1377), please see the "Kind Words" page and the long entry there.

Just remember to "Have Fun Shooting"!

David G.
10 Comments

    Author: 
    David Grimes

    A serious airgun enthusiast with a particular fondness of Crosman pistols, I learn something almost every day.  


    I am not an overall expert or guru, but I will share some things from time to time that maybe some of you will find interesting.  


    There are often many ways to accomplish an objective. I do not pretend to either know them all or imply that I am always right. 


    Therefore, I reserve the right to be wrong from time to time.  ;) 

    Archives

    May 2023
    January 2023
    July 2015
    October 2014
    May 2014
    April 2014
    March 2014
    December 2013
    November 2013
    October 2013

    Categories

    All

    RSS Feed

CLICK to Visit Our eBay Store
Link to CAPOF FORUM
Link to GTA FORUM
Proudly powered by Weebly